• July 21, 2024, 12:44:42 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIY - Modify Static Route for LAN to LAN  (Read 6289 times)


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
DIY - Modify Static Route for LAN to LAN
« on: May 13, 2014, 11:33:40 AM »

NOTE: This is not officially supported by D-Link. D-Link reserves the LAN to LAN routing feature for use with higher end router products. If you need LAN to LAN routing, we recommend phone contacting your regional D-Link support office to find out which router models they support for LAN to LAN routing.

1. Install firebug add-on for Firefox browser.

2. Load the static routing page in Firefox.

3. Right click on the WAN drop list (there should have been LAN here as well) and select Inspect Element.

4. This line will appear in the firebug window:
[ + ] <select style="width: 90px;" id="interface0" name="interface0">

5. Press the [ + ] so you can see this:
<option default="true" value="WAN">WAN</option></select>

6. Change <option default="true" value="WAN">WAN</option></select> to this:
<option default="true" value="LAN">LAN</option></select>

7. Now press 'save settings' in the router web page. Done.

8. Power cycle the router, then open the routers web page and navigate to the Routing page, right click on the page, left click on view page source, scroll down and look up this line:
<input type="hidden" id="static_routing_00" name="static_routing_00" value="1/xxxname/192.168.xxx.x/">
As you can see there's LAN written there, not WAN.

Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.