D-Link VPN Router > DSR-1000AC
Forwarding Ports
geronimo78:
Hi,
I have a DSR 1000AC (Hw : A1, Fw 3.10ww) and I try to have 3 different incoming ports to the same port number on 3 different IP addresses.
Example: incoming port 22 to 192.168.0.100 port 22
incoming port 23 to 192.168.0.101 port 22
incoming port 24 to 192.168.0.102 port 22
I have created 3 custum services :
Rules name : Port22
Type : TCP
Source Start Port : 1
Source Finish Port : 65535
Destination Start Port : 22
Destination Finish Port : 22
Rules name : Port23
Type : TCP
Source Start Port : 1
Source Finish Port : 65535
Destination Start Port : 23
Destination Finish Port : 23
Rules name : Port24
Type : TCP
Source Start Port : 1
Source Finish Port : 65535
Destination Start Port : 24
Destination Finish Port : 24
After I have created 3 firewall rules :
From Zone : Insecure (WAN)
To Zone : Secure (LAN)
Service : Port22
Action : Always allow
Source Host : Any
Destination : 192.168.0.100
Translate Port : Off
External Port : Dedicate Wan
From Zone : Insecure (WAN)
To Zone : Secure (LAN)
Service : Port23
Action : Always allow
Source Host : Any
Destination : 192.168.0.100
Translate Port : On
Translate port : 23
External Port : Dedicate Wan
From Zone : Insecure (WAN)
To Zone : Secure (LAN)
Service : Port24
Action : Always allow
Source Host : Any
Destination : 192.168.0.100
Translate Port : On
Translate port : 24
External Port : Dedicate Wan
I can access to IP_EXT:22 to 192.168.0.100:200
but IP_EXT:23 is closed and I can't acces to 192.168..0.101:22
Any body can help me
Thank
FurryNutz:
* What region are you located?
Internet Service Provider and Modem Configurations
* What ISP Service do you have? Cable or DSL?
Is uPnP disabled on the router?
I don't see any firewall configurations for IP address .101.
Is there a Virtual Server feature on the DSR by chance?
geronimo78:
I am located near Paris in France
I have a cable connection (1Gb/60Mb)
The uPnP service is disable
I make 2 mistakes when I have copied the configuration in the message :
for the second firewall rule, the destination is 192.168.0.101 and for the third is 192.168.0.102
I don't find Virtual server
FurryNutz:
If you disable the .100 rule, do any of the others work?
geronimo78:
No, when .100 rule is disable, .101 and .102 rules doesn't work
I don't anderstand how the translate port feature works, I don't have found on the web, any documentation about translate port
Navigation
[0] Message Index
[#] Next page
Go to full version